Temperature, salinity, light and fluorescence (CTD) measurements from the Kongsfjorden (Svalbard) marine observatory (mooring) September 2009-September 2010
As part of the "KROP - Kongsfjorden Rijpfjorden Observatory Programme" UiT The Arctic University of Norway and The Scottish Association for Marine Science maintain marine observatories (moorings) in two high-Arctic fjords in Svalbard: Kongsfjorden and Rijpfjorden. The observatories consists of an array of CTDs, temperature loggers, ADCPs and a sediment trap, in addition to various other instruments or installations that change from year to year. This dataset contains the CTD, PAR and fluorescence data from Kongsfjorden 2009-2010. Fluorescence data is given as raw voltage only, due to calibration and fouling issues. It is meant as an indication of the timing of the phytoplankton bloom, not as absolute chlorophyll a concentration. No post-recovery processing of light data (to correct for fouling) has been performed. An additional temperature logger was mounted on the pick-up line, allowing for shallow (approx. 15 m) temperature data. First deployment including an ePAR sensor on a SBE16+ at 37m. Included in all future deployments. Settlement plates were mounted below the SBE16p but the data has not been used or published.
As part of the KROP - Kongsfjorden Rijpfjorden Observatory Programme UiT The Arctic University of Norway and The Scottish Association for Marine Science maintain a marine observatory in the high-Arctic location Kongsfjorden, Svalbard, since 2002. The observatory consists of an array of CTDs, temperature loggers, ADCPs and a sediment trap, in addition to various other instruments or installations that change from year to year. This dataset contains the temperature data of the Vemco temperature logger that was located at 47m depth in the deployment year 2009-2010. Several of the temperature loggers listed in the mooring diagram failed and thus did not record any data.
As part of the KROP - Kongsfjorden Rijpfjorden Observatory Programme UiT The Arctic University of Norway and The Scottish Association for Marine Science maintain a marine observatory in the high-Arctic location Kongsfjorden, Svalbard, since 2002. The observatory consists of an array of CTDs, temperature loggers, ADCPs and a sediment trap, in addition to various other instruments or installations that change from year to year. This dataset contains the temperature data of the Vemco temperature logger that was located at 188m depth in the deployment year 2009-2010. Several of the temperature loggers listed in the mooring diagram failed and thus did not record any data.
As part of the KROP - Kongsfjorden Rijpfjorden Observatory Programme UiT The Arctic University of Norway and The Scottish Association for Marine Science maintain a marine observatory in the high-Arctic location Kongsfjorden, Svalbard, since 2002. The observatory consists of an array of CTDs, temperature loggers, ADCPs and a sediment trap, in addition to various other instruments or installations that change from year to year. This dataset contains the temperature data of the Vemco temperature logger that was located at 15m depth in the deployment year 2009-2010. Several of the temperature loggers listed in the mooring diagram failed and thus did not record any data.
As part of the KROP - Kongsfjorden Rijpfjorden Observatory Programme UiT The Arctic University of Norway and The Scottish Association for Marine Science maintain a marine observatory in the high-Arctic location Kongsfjorden, Svalbard, since 2002. The observatory consists of an array of CTDs, temperature loggers, ADCPs and a sediment trap, in addition to various other instruments or installations that change from year to year. This dataset contains the temperature data of the Vemco temperature logger that was located at 136m depth in the deployment year 2009-2010. Several of the temperature loggers listed in the mooring diagram failed and thus did not record any data.
As part of the KROP - Kongsfjorden Rijpfjorden Observatory Programme UiT The Arctic University of Norway and The Scottish Association for Marine Science maintain a marine observatory in the high-Arctic location Kongsfjorden, Svalbard, since 2002. The observatory consists of an array of CTDs, temperature loggers, ADCPs and a sediment trap, in addition to various other instruments or installations that change from year to year. This dataset contains the temperature data of the Vemco temperature logger that was located at 88m depth in the deployment year 2009-2010. Several of the temperature loggers listed in the mooring diagram failed and thus did not record any data.
As part of the KROP - Kongsfjorden Rijpfjorden Observatory Programme, UiT The Arctic University of Norway and The Scottish Association for Marine Science maintain a marine obervatory in the high-Arctic location Kongsfjorden, Svalbard, since 2002. The observatory consists of an array of CTDs, temperature loggers, ADCPs and a sediment trap, in addition to various other instruments or installations that change from year to year. This dataset contains the temperature and salinity data of the Seabird SBE37 MicroCAT that was located at 27m depth in the deployment year 2009-2010.
As part of the KROP - Kongsfjorden Rijpfjorden Observatory Programme UiT The Arctic University of Norway and The Scottish Association for Marine Science maintain a marine observatory in the high-Arctic location Kongsfjorden, Svalbard, since 2002. The observatory consists of an array of CTDs, temperature loggers, ADCPs and a sediment trap, in addition to various other instruments or installations that change from year to year. This dataset contains the temperature data of the Vemco temperature logger that was located at 37m depth in the deployment year 2009-2010. Several of the temperature loggers listed in the mooring diagram failed and thus did not record any data.
As part of the KROP - Kongsfjorden Rijpfjorden Observatory Programme UiT The Arctic University of Norway and The Scottish Association for Marine Science maintain a marine observatory in the high-Arctic location Kongsfjorden, Svalbard, since 2002. The observatory consists of an array of CTDs, temperature loggers, ADCPs and a sediment trap, in addition to various other instruments or installations that change from year to year. This dataset contains the temperature data of the Vemco temperature logger that was located at 57m depth in the deployment year 2009-2010. Several of the temperature loggers listed in the mooring diagram failed and thus did not record any data.
As part of the KROP - Kongsfjorden Rijpfjorden Observatory Programme UiT The Arctic University of Norway and The Scottish Association for Marine Science maintain a marine observatory in the high-Arctic location Kongsfjorden, Svalbard, since 2002. The observatory consists of an array of CTDs, temperature loggers, ADCPs and a sediment trap, in addition to various other instruments or installations that change from year to year. This dataset contains the temperature data of the Vemco temperature logger that was located at 72m depth in the deployment year 2009-2010. Several of the temperature loggers listed in the mooring diagram failed and thus did not record any data.
As part of the KROP - Kongsfjorden Rijpfjorden Observatory Programme, UiT The Arctic University of Norway and The Scottish Association for Marine Science maintain a marine obervatory in the high-Arctic location Kongsfjorden, Svalbard, since 2002. The observatory consists of an array of CTDs, temperature loggers, ADCPs and a sediment trap, in addition to various other instruments or installations that change from year to year. This dataset contains the temperature and salinity data of the Seabird SBE37 MicroCAT that was located at 213m depth in the deployment year 2009-2010.
As part of the KROP - Kongsfjorden Rijpfjorden Observatory Programme, UiT The Arctic University of Norway and The Scottish Association for Marine Science maintain a marine observatory in the high-Arctic location Kongsfjorden, Svalbard, since 2002. The observatory consists of an array of CTDs, temperature loggers, ADCPs and a sediment trap, in addition to various other instruments or installations that change from year to year. This dataset contains the temperature, salinity, density data of a Seabird SBE16p CTD with E(PAR) light and chlorophyll fluorescence auxiliary sensors which was located at 37m depth in the deployment year 2009-2010. The fluorescence sensor data is given as raw voltage due to fouling and calibration issues. It is only suitable to detect fluorescence peaks, not to compute actual chlorophyll concentrations. The equation to compute chlorophyll concentration is given in the variable attributes, use with care. E(PAR) data is not corrected for drift due to fouling during the deployment.